YG200 YAMAHA USED PICK & PLACE MACHINE 90% NEW
The printed circuit boards used in electronics products like cellular phones and personal computers mount from dozens to hundreds of types of electrical parts. In terms of size, these parts come in a variety of sizes and shapes, ranging from chip resistors of 0.4mm x 0.2mm to connector parts measuring up to 100mm.
YAMAHA/YG200
Applicable PCB:L330×W250mm to L50×W50mm
Through-put (Optimum) 45,000CPH（0.08sec/CHIP Equivalent)
Mounting accuracy (Yamaha’s standard components)
Absolute accuracy (μ+3σ)：±0.05mm /CHIP
Repeatability (3σ)：±0.03mm/CHIP
Applicable components:0402（Metric base)to □14mm components
Height of components which can be mounted : 6.5mm or less
Alowable height on PCB surface before transport 6.5mm or less
Number of component types
80types（Max, 8mm tape reel conversion)
Power supply
3-Phase AC 200/208/220/240/380/400/416V ±10% 50/60Hz
Air supply source
0.55MPa or more, in clean, dry states
External dimension
L1,950×W1,408（End of cover)×H1,450mm（cover top)
L1,950×W1,608（End of guide for feeder carriage)×H1,450mm（cover top)
Weight Appro:2080KG
Description
Used machines are cheap
The printed circuit boards used in electronics products like cellular phones and personal computers mount from dozens to hundreds of types of electrical parts. In terms of size, these parts come in a variety of sizes and shapes, ranging from chip resistors of 0.4mm x 0.2mm to connector parts measuring up to 100mm.
Surface mounters are the machines used to automatically mount these electrical/electronic components on these printed circuit boards and they can be divided into two types, high-speed mounters and multifunction mounters, based on the size of parts they mount and the speed with which they mount them. High-speed mounters are high-productivity machines used for mounting parts of 15mm or less, which they are expected to mount at speeds of 0.10～ 0.12 sec.
per part. And, with the increasing compactness of today’s cellular/mobile products, mounters capable of high-concentration/high-precision mounting are in demand.
On the other hand, multifunction mounters are machines that mount parts over 15mm in size, IC parts like QFP (Quad Flat Package) and BGA (Ball Grid Array) parts and irregular shaped parts like connectors, switches and covers, etc., and they must have the versatility to handle a wide variety of parts and be capable of mounting and assembling them with a high degree of positioning accuracy.
Set makers accommodate the production needs of today’s varied printed circuit boards by setting up their production lines with combinations of high-speed mounters and multifunction mounters to perform the different assembly functions necessary.
Online inquiry
Email: service@smtfuture.com
